论文著作：
[1] Gang Zhao, Jiaqi Xu, Yajie Feng, Jianbo Tang, Yousi Chen, Shiqing Xin, Xigao Jian, Shuxin Li, Shouhai Zhang, Jian Xu, A Rate-dependent Cohesive Zone Model with the effects of Interfacial Viscoelasticity and Progressive Damage. Engineering Fracture Mechanics, 2021, 248, 107695.
[2] Gang Zhao, Jianbo Tang, Jun Wang, Yunsheng Chen, Yajie Feng, Yousi Chen, Shiqing Xin, Xigao Jian, Shouhai Zhang, Jian Xu, An Advanced Finite Element Modeling for the Failure of Notched Ceramic Matrix Composite with TFP Patch Reinforcement. Frontiers in Materials, 2021, 8, 701193.
[3] Jianbo Tang, Gang Zhao, Jun Wang, Yue Ding, Yajie Feng, Yunsheng Chen, Chao Zhang, Qing Huang, Shiqing Xin, Jian Xu, Computational Geometry-Based 3D Yarn Path Modeling of Wound SiCf/SiC-Cladding Tubes and Its Application to Meso-Scale Finite Element Model. Frontiers in Materials, 2021, 8, 701205.
[4] Yajie Feng, Jun Wang, Nianwei Shang, Gang Zhao, Chao Zhang, Jianbo Tang, Shiqing Xin, Andreas Hornig, Maik Gude, Qing Huang, Xigao Jian, Jian Xu, Multiscale Modeling of SiCf/SiC Nuclear Fuel Cladding Based on FE-Simulation of Braiding Process. Frontiers in Materials, 2021, 7, 634112.
[5] Sijia Shen, Yunsheng Chen, Lingwei Yang, Yajie Feng, Jian Xu, Role of columnar structure on the fracture anisotropy of physical vapor deposited Al/SiC nanolaminates. Materials Science and Engineering A, 2020, 786, 139387.
[6] Yunsheng Chen, Jun Wang, Yajie Feng, Gang Zhao, Xigao Jian, Lingwei Yang, Jian Xu, High temperature indentation creep mechanics of metal-ceramic nanolaminates. Materials Science and Engineering A, 2020.
[7] Jun Wang, Yunsheng Chen, Yajie Feng, Gang Zhao, Xigao Jian, Qing Huang, Lingwei Yang, Jian Xu, Influence of porosity on anisotropic thermal conductivity of SiC fiber reinforced SiC matrix composite: A microscopic modeling study. Ceramics International, 2020, 46, 781-788, DOI: 10.1016/j.ceramint.2020.08.029.
[8] Jun Wang, Yajie Feng, Gang Zhao, Lingwei Yang, Jian Xu, Effect of elastic and thermal mismatch on push-in mechanism and shear strength measurement of fiber/matrix interface. Composite Interfaces, 2020, DOI: 10.1080/09276440.2020.1712917.
[9] 冯亚杰, 赵刚, 唐建波, 尚念伟, 陈友汜, 徐 剑, CAFE方法在陶瓷材料裂纹扩展多尺度模拟中的应用, 中国力学大会, 2019.
[10] Wensong Wang, Zheng Fang, Shiqing Xin, Ying He, Yuanfeng Zhou, Shuangmin Chen, Jian Xu, Guozhu Liu, Tracing High-quality Isolines for Discrete Geodesic Distance Fields. IEEE Transactions on Visualization and Computer Graphics (TVCG), 2019.
[11] Zhiyang Dou, Shiqing Xin, Rui Xu, Jian Xu, Yuanfeng Zhou, Shuangmin Chen, Wenping Wang, Xiuyang Zhao, Changhe Tu, Top-Down Shape Abstraction Based on Greedy Pole Selection. IEEE Transactions on Visualization and Computer Graphics (TVCG), 2019.
[12] Luming Cao, Shuangmin Chen, Jian Xu, Shiqing Xin, Yuanfeng Zhou, Ying He, Guozhu Liu, Changhe Tu, An accurate quadrature approach for Lipschitz continuous functions over arbitrary planar domains. ACDDE 2019.
[13] 程景亮, 于昊, 赵俊浩, 徐 剑, 陈双敏, 周元峰, 辛士庆, 面向口扫数字模型的全自动牙齿分割, GDC, 2019.
[14] Junhao Zhao, Shuangmin Chen, Guozhu Liu, Jian Xu, Shiqing Xin, Yuanfeng Zhou, Wenping Wang, Automatically Modeling Piecewise Planar 3D Object from Unorganized Point Cloud, CVM 2019, will be published on Computer-Aided Design.
[15] 李梦龙, 朱世鹏,欧阳琴, 马洪波, 徐 剑, 陈友汜, 杨云华,不同直径国产高强中模型碳纤维结构及其轴向压缩强度关系的研究, 高科技纤维与应用, 2018, 43(6): 33-39.
[16] 冯亚杰, 尚念伟, 唐建波, 赵刚, 陈友汜, 徐 剑, 基于CAFE方法的陶瓷基复合材料损伤演化, NCCM-20, 2018.
[17] 唐建波, 尚念伟, 冯亚杰, 赵刚, 陈友汜, 徐 剑, 基于凸包算法的纤维缠绕3D路径仿真, NCCM-20, 2018.
[18] 赵刚, 唐建波, 冯亚杰, 尚念伟, 陈友汜, 徐 剑, 面向纤维增强复合材料多尺度方法研究, NCCM-20, 2018.
[19] J. Xu, S. V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, J.Degrieck, A comparative study of twill weave reinforced composites under tension-tension fatigue loading: Experiments and meso-modelling, Composite Structures, 2016.01, 135, 306-315.
[20] J. Xu, S. V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, J.Degrieck, A progressive damage model of textile composites on meso-scale using finite element method: Fatigue damage analysis, Computers & Structures, 2015.05, 152, 96 -112.
[21] A. García-Carpintero, J. Xu, C. Lopes, C. González, A model for the generation of the geometrical meso-structure of a triaxially braided composites, XI Congreso Nacional de Materiales Compuestos, Madrid, 2015.07.06-2015.07.08.
[22] J. Xu, S. V. Lomov, I. Verpoest, S. Daggumati, W. V. Paepegem, J.Degrieck, M. Olave, A progressive damage model of textile composites on meso-scale using finite element method: static damage analysis, Journal of Composite Materials, 2014.10, 48(25), 3091-3109.
[23] S. Daggumati, I. De Baere, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, I. Verpoest, Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre reinforced composite, Composites Science and Technology, 2013.01, 74, 20-27.
[24] W. Van Paepegem, I. De Baere, S. Daggumati, C. Hochard, J. Xu, S. Lomov, I. Verpoest, J. Degrieck, Stress-strain analysis of a carbon pps during and after fatigue loading conditions, I6th International Conference on Composites Testing and Model Identification (CompTest-6), Aalborg, Denmark, 2013.04.22-2013.04.24
[25] S. Daggumati, W. Van Paepegem, J. Degrieck, T. Praet, B. Verhegghe, J. Xu, S. V. Lomov, I. Verpoest, Local strain in a 5-harness satin weave composite under static tension: Part II---Meso-FE analysis, Composites Science and Technology, 2011.06, 71(9), 1217-1224.
[26] S. Daggumati, E. Voet, W. Van Paepegem, J. Degrieck, J. Xu, S. V. Lomov, I. Verpoest, Local strain in a 5-harness satin weave composite under static tension: Part I---Experimental analysis, Composites Science and Technology, 2011.05, 71(8), 1171-1179.
[27] M. Olave, J. Xu, S. Lomov, D. Vandepitte, Internal geometry variability evaluation of two woven structures, Proceedings of 16th International Conference on Composite Structures (ICCS 16), Porto, Portugal, 2011.07.28-2011.07.30
[28] S. V. Lomov, A. E. Bogdamovich, N. Taketa, J. Xu, Inherent carbon fibre stiffenning as seen in textile reinforced compposites, Proceedings of the 5th International Conference on Composites Testing and Model Indentification (CompTest-5), Lausanne, Switzerland, 2011.02.14-2011.02.16.
[29] S. Daggumati, E. Voet, W. VanPaepegem, J. Degrieck, T. Praet, B. Verhegghe, J. Xu, S. V. Lomov, I. Verpoest, Evaluation of Local Strain Profiles in a Satin Weave Composite: Experimental vs Meso-FE Modelling, Proceedings of 14th European Conference on Composite Materials, Budapest, Hungary, 2010.06.07-2010.06.10.
[30] S. Daggumati, I. De Baere, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, I. Verpoest, Local damage in a 5-harness satin weave composite under static tension: Part I---Experimental analysis, Composites Science and Technology, 2010.11, 70(13), 1926-1933.
[31] J. Xu, S. V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, J. Degrieck, M. Olave, FE-modeling of damage of twill carbon/epoxy composite on meso-scale, materials characterization and experimental verification, Recent Advances in Textile Composites, 2010, 44-+., Proceedings of 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 2010.10.26-2010.10.28.
[32] S. Daggumati, E. Voet, W. V. Paepegem, J. Degrieck, T. Praet, B.Verhegghe, J. Xu, S. V. Lomov, I. Verpoest, Influence of the Internal Yarn Nesting (Shifting) on the Local Structural Response of a Satin Weave Composite-An Experimental and Numerical Overview, 2010, 238-+., Proceedings of 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 2010.10.25-2010.10.29.
[33] V. Carvelli, S. V. Lomov, A. Bogdanovich, M. Li，J. Pazmino, J. Xu, D. Mungalov, I. Verpoest, Static and fatigue tensile behaviour of 3D braided carbon/epoxy composite, Proceedings of 14th European Conference on Composite Materials, Budapest, Hungary, 2010.06.07-2010.06.10.
[34] J. Xu, S. Lomov, I. Verpoest, S. Daggumati, W. V. Paepegem, J.Degrieck, Progressive fatigue damage modeling of textile composite on meso-scale with fe-method, SAMPE Europe 31st international technical conference (SEICO 2010): Improvement of materials and application charateristics, Paris, Franc, 2010.04.12-2010.04.14.
[35] S. Daggumati, W. Van Paepegem, J. Degrieck, J. Xu, S. V. Lomov, I.Verpoest, Local damage in a 5-harness satin weave composite under static tension: Part I---Meso-FE modelling, Composites Science and Technology, 2010.11, 70(13), 1934-1941.
[36] S. Daggumati, W. Van Paepegem, J. Degrieck, J. Xu, S. V. Lomov, I.Verpoest, Effect of ply stacking on the vatiation in local strain and damage behavior in 5-hardness strain weave composite, Proceedings of 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 2010.10.25-2010.10.29.
[37] J. Xu, S. V. Lomov, I. Verpoest, S. Daggumati, W. V. Paepegem, J.Degrieck, Meso-scale modelling of static and fatigue damage in woven composite materials with Finite Element Method, Proceedings of 17th International Conference on Composite Materials (ICCM-17), Edinburgh, UK, 2009.07.27-2009.07.31.
[38] S. Daggumati, I. De Baere, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, I. Verpoest, Meso-scale modelling in thermoplastic 5-harness satin weave composite, Proceedings of 17th International Conference on Composite Materials (ICCM-17) Edinburgh, UK, 2009.07.27-2009.07.31.
[39] S. V. Lomov, D. Ivanov, V. Koissin, J. Kustermans, K. Vallons, J. Xu, I. Verpoest, V. Carvelli, V. Tomaselli, V. Witzel, Damage initiation in textile composites: a gallery, Proceedings of SEICO 09 SAMPE Europe International Conference, Paris, France, 2009.03.23-2009.03.25.
徐剑
辽宁省
研究领域：
新材料
研究方向：
复合材料多尺度设计及工艺过程仿真、复合材料工艺开发及复合材料装备研发
所在单位：
大连理工大学
