新材料

新材料及异种材料的钎焊及扩散焊连接技术及应用基础研究，具体包括：
1） 非金属材料与金属的复合反应连接机理研究
2） 异种金属的钎焊与扩散
3） 碳纳米管或石墨烯强化异种材料接头机制分析
4） 热电材料的连接机理及工艺研究
5） 仿生结构辅助的钎焊与扩散焊

[1] Yingkai Ma, Qing Chang*, Hairui Ding, Zhan Sun, Xinrui Guo, Weimin Long, Zhenwen Yang, Ying Wang, Lixia Zhang*. Diffusion mechanism of Zr-4 alloy at ultra-low temperature based on the α→β phase transition promoted by thermo-hydrogen treatment. Acta materialia, 2025:294.
[2] Wei Ren, Huiyuan Geng*, Zihao Zhang, Lixia Zhang*. Filling-Fraction Fluctuation Leading to Glasslike Ultralow Thermal Conductivity in Caged Skutterudites. Physical Review Letters. 2017: 118(24).
[3] Wei Ren, Yan Sun, Jialun Zhang, Yiping Xia, Huiyuan Geng*, Lixia Zhang*. Doping distribution in Skutterudites with ultra-high filling fractions for achieving ultra-low thermal conductivity. Acta materialia, 2021: 209.
[4] Hui Pan, Zhan Sun, Huiyuan Geng, Qing Chang, Bo Zhang, Lixia Zhang*. Thermal stability optimization of single-leg skutterudite-based thermoelectric devices based on lattice distortion effects. Journal of Materiomics, 2025: 11(2).
[5] Xinrui Guo, Qing Chang*, Lixia Zhang*, Zhan Sun, Bo Zhang, Zeming Wang, Zhenwen Yang, Boyu Zhang. Surface hydrogenation treatment facilitating ultra-low temperature diffusion bonding of Zr-4 alloy. Journal of Materials Research and Technology, 2025: 36.
[6] Bo Zhang, Qing Chang, Zhan Sun, Degang Li, Hui Pan, Lixia Zhang*. A concept of regulating the distribution of continuous brittle phases by spatial division of the Ti3SiC2/Ti2AlNb brazing seam. Materials & Design. 2022: 221.
[7] Bo Zhang, Lixia Zhang*, Zhan Sun, Qing Chang, Jicai Feng. Enhancement of high-temperature oxidation resistance of the AgCu-based alloy by in-situ fabricating three-dimensional TiC nanosheet reinforcement. Corrosion Science. 2022: 198.
[8] Bo Zhang, Zhan Sun, Lixia Zhang*, Degang Li, Qing Chang, Hui Pan. Understanding the microstructure evolution mechanism and the microstructure-strength correlations of Ti3SiC2/Ti2AlNb joint brazed with AgCu interlayer. Materials Science and Engineering: A. 2022: 847.
[9] Jialun Zhang, Wei Ren, Hangbin Feng, Huiyuan Geng, Lixia Zhang*. Controlling reaction process to realize high thermoelectric performance in filled skutterudites. Journal of Alloys and Compounds. 2021: 861.
[10] Jinghong Yang, Lixia Zhang*, Zhan Sun*, Jicai Feng. Wetting and reaction of BN-SiO2 ceramic by molten Ti-40Ni-20Nb (at.%) filler alloy. Applied Surface Science. 2020: 499.
[11] Zhan Sun, Lixia Zhang*, Bo Zhang, Qing Chang, Yanan Song. A strategy to fabricate strength-ductility enhanced braze filler reinforced by 3-dimensional graphene sponge for joining C/C composites. Materials & Design. 2020: 189.
[12] Wei Ren, Huiyuan Geng*, Lixia Zhang*, Xianpeng Liu, Tianhong He, Jicai Feng. Simultaneous blocking of minority carrier and high energy phonon in p-type skutterudites. Nano Energy. 2018: 46.
[13] Zhan Sun, Lixia Zhang*, Tongda Hao, Jicai Feng. Brazing of SiO2f/SiO2 composite to Invar using a graphene-modified Cu-23Ti braze filler. Ceramics International. 2018: 44(13).
[14] Xiaoyu Tian, Jicai Feng, Junmiao Shi, Yuzhang Liu, Lixia Zhang*. Interfacial microstructure and mechanical properties of the vacuum brazed C/SiC composite and Nb joints. Vacuum. 2017: 146.
[15] Zhan Sun, Lixia Zhang*, Junlei Qi, Zihao Zhang, Chenglong Tian, Jicai Feng. Brazing of SiO2f/SiO2 composite modified with few-layer graphene and Invar using AgCuTi alloy. Materials & Design. 2015: 88.
[16] Xiaoyu Tian, Jicai Feng, Junmiao Shi, Hongwei Li, Lixia Zhang*. Brazing of ZrB2-SiC-C ceramic and GH99 superalloy to form reticular seam with low residual stress. Ceramics International. 2015: 41(1).
[17] Zhenwen Yang, Lixia Zhang*, Yingchun Chen, Junlei Qi, Peng He, Jicai Feng, Interlayer design to control interfacial microstructure and improve mechanical properties of active brazed Invar/SiO2–BN joint, Materials Science and Engineering A, 575, 199-205(2013).
[18] Zhenwen Yang, Lixia Zhang*, Xiaoyu Tian, Yuzhang Liu, Peng He, Jicai Feng, Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2- Ni–B brazing powder, Materials Characterization,79, 52-59(2013).
[19] Zhenwen Yang, Lixia Zhang*, Wei Ren, Min Lei, Jicai Feng, Interfacial microstructure and strengthening mechanism of BN-doped metal brazed Ti/SiO2-BN joints, Journal of the European Ceramic Society, 33, 759-768(2013).
[20] Zhenwen Yang, Lixia Zhang*, Wei Ren, Qing Xue, Peng He, Jicai Feng, Microstructure and mechanical properties of active brazed SiO2/BN ceramic modified by electron-beam evaporated Ti, Materials Science and Engineering A, 560, 817-823(2013).
[21] Zhenwen Yang, Lixia Zhang*, Xiaoyu Tian, Qing Xue, Jicai Feng, Correlation between microstructure and mechanical properties of active brazed Invar/SiO2–BN joints, Materials Science and Engineering A, 556, 722-727(2012).
[22] Z.W. Yang, L.X. Zhang, Q. Xue, P. He, J.C. Feng, Interfacial microstructure and mechanical property of SiO2-BN ceramics and Invar joint brazed with Ag–Cu–Ti active filler metal, Materials Science and Engineering A, 534, 309-313(2012).
[23] Z.W. Yang, L.X. Zhang, P. He, J.C. Feng, Interfacial structure and fracture behavior of TiB whisker-reinforced C/SiC composite and TiAl joints brazed with Ti–Ni–B brazing alloy, Materials Science and Engineering A, 532, 471-475(2012).
[24] Z.W. Yang, P. He, L.X. Zhang, J.C. Feng, Microstructural evolution and mechanical properties of the joint of TiAl alloys and C/SiC composites vacuum brazed with Ag–Cu filler metal, Materials Characterization,62, 825-832(2011).
[25] Duo Liu, Lixia Zhang*, Jicai Feng, Hongbin Liu, Peng He, Interface evolution of SiO2 glass ceramic and Ti-6Al-4V alloy joint brazed with Ag-Cu-Ti alloy, Materials Science and Technology, 27(1), 310-313(2011).
[26] Jicai Feng, Duo Liu, Lixia Zhang*, X.C. Lin, Peng He, Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti–6Al–4V joint brazed with AgCu/Ni interlayer, Materials Science and Engineering A, 527(6), 1522-1528(2010).
[27] Hongbin Liu, Lixia Zhang*, Duo Liu, Peng He, Jicai Feng, Interface microstructure analysis of SiO2 glass ceramic and Ti–6Al–4V alloy joint brazed with Ti–Zr–Ni–Cu alloy, Materials Science and Technology, 26(2), 188-192(2010).
[28] Fengchun Xie, Lixia Zhang*, Peng He, Jicai Feng, Interfacial characteristics of high frequency induction brazed Cu and pre-metalized graphite joints, Journal of Central South University of Technology, 16(6), 902-905(2009).
[29] Duo Liu, Lixia Zhang*, Jicai Feng, Hongbin Liu, Peng He, Microstructure and fracture behavior of SiO2 glass ceramic and TC4 alloy joint brazed with TiZrNiCu alloy, Journal of Central South University of Technology, 16(5), 713-718(2009).

授权发明专利70余项，部分授权发明专利如下：
[1] 张丽霞,王俊,张博,常青,孙湛,高铭. 一种基于恒流电场作用下实现锆及其合金低温扩散连接的方法. 中国, ZL119387795B, 2025-05-27.
[2] 张丽霞,潘辉,孙湛,耿慧远,常青,张博. 一种高热稳定性且膨胀系数可调的方钴矿元素阻隔层的制备方法. 中国, ZL117295382B, 2024-06-14.
[3] 张丽霞,潘辉,常青,张博,孙湛,耿慧远. 一种方钴矿基热电材料与金属电极的连接方法. 中国, ZL115502538B, 2023-08-11.
[4] 张丽霞,张博,孙湛,耿慧远,常青. 一种采用金箔中间层低温扩散连接Ti3SiC2陶瓷的方法. 中国, ZL114029601B, 2023-02-28.
[5] 张丽霞,陈曦,孙湛,陈勃,常青,冯吉才. 一种ZrC-SiC陶瓷与TC4钛合金钎焊方法. 中国, ZL112427759B, 2022-08-26.
[6] 张丽霞,张博,孙湛,耿慧远,常青. 一种利用三维网络增强相提高AgCu合金高温抗氧化性的方法. 中国, ZL113430414B, 2022-03-01.
[7] 张丽霞,张赛赛,孙湛,李句. 一种YSZ陶瓷与不锈钢空气反应钎焊连接方法. 中国, ZL110253100B, 2020-11-27.
[8] 张丽霞,田成龙,宋亚南,孙湛,冯吉才. 一种SiO2-BN复合陶瓷与Invar合金的钎焊方法. 中国, ZL108296586B, 2020-05-12.
[9] 张丽霞,雷敏,刘世艳,张博,冯吉才. 一种复合中间层钎焊陶瓷或陶瓷基复合材料与金属的方法. 中国, ZL106493443B, 2018-10-09.
[10] 张丽霞,刘海,任伟,田晓羽,曹健,冯吉才. 一种金属表面冷金属过渡毛化后与异种金属连接的方法. 中国, ZL103978305B, 2016-04-27.
[11] 张丽霞,孟德强,石俊彬,杨景红,亓钧雷,冯吉才. 可形成互穿网络结构钎缝的非金属材料与金属材料的钎焊方法. 中国, ZL103990880B, 2015-12-02.
[12] 张丽霞,张若蘅,田成龙,雷敏,亓钧雷,冯吉才. 一种硬质合金与金属的扩散连接方法. 中国, ZL103302371B, 2015-09-09.
[13] 张丽霞,张俊杰,亓钧雷,张大磊,曹健,冯吉才. 一种陶瓷基纤维编织复合材料与金属材料的碳纳米管辅助钎焊方法. 中国, ZL201210051583.1
[14] 张丽霞,亓钧雷,王刚,曹健,冯吉才. 真空活化焊接装置. 中国, ZL201110188104.6, 2012-10
[15] 张丽霞,杨振文,刘玉章,何鹏,曹健,冯吉才. 焊接碳/碳化硅陶瓷基复合材料与钛铝基合金的钎料及钎焊的方法. 中国, ZL201010300738.1, 2012-07
[16] 张丽霞,李宏伟,田晓羽,杨振文,王宇欣,刘玉章. 一种镍基高温钎料及其制备方法. 中国, ZL201010218332.9, 2012-05
[17] 张丽霞,赵磊,冯吉才. 一种石英纤维编织复合材料与金属材料的连接方法. 中国, ZL20081137400.1, 2010-01
[18] 张丽霞,刘多,冯吉才. 陶瓷及陶瓷基复合材料与钛合金的钎焊焊接方法. 中国, ZL200810136840.5, 2010-06
[19] 张丽霞,刘玉章,冯吉才. 抗剪强度高、生产效率高的碳/碳化硅与铌或铌合金用复合箔片钎焊的方法. 中国, ZL200810064135.9, 2010-06
[20] 张丽霞,王颖,冯吉才,徐富家,张春光. Al2O3陶瓷与金属材料的钎焊方法. 中国, ZL200810137483.4, 2010-08

作为项目负责人，承担国家重点研发计划项目、国家自然科学联合基金、国家优秀青年科学基金、国家自然科学青年基金、国家自然科学面上基金（2项）、“教育部新世纪优秀人才支持计划”、中国博士后特别资助、教育部留学回国基金、中国博士后基金（一等）、黑龙江省博士后特别资助、哈尔滨市科技攻关项目、哈尔滨市留学回国基金等18项课题；另外参与国家自然科学基金委创新群体等多项课题。

技术咨询