新材料

聚合物复合材料、聚合物泡沫、多功能轻量化聚合物复合材料及器件

[1] Zhao J., Wang G.*, Chai J., Chang E., Wang S., Zhang A., Park C. B. Polylactic acid/UV-crosslinked in-situ ethylene-propylene-diene terpolymer nanofibril composites with outstanding mechanical and foaming performance. Chem. Eng. J. 2022, 447, 137509. (SCI, IF: 15.1)
[2] Zhao J., Huang Y., Wang G.*, Qiao Y., Zhang A., Park C. B. Fabrication of outstanding thermal-insulating, mechanical robust and superhydrophobic PP/CNT/sorbitol derivative nanocomposite foams for efficient oil/water separation. J. Hazard. Mater. 2021, 218, 126295. (SCI, IF:13.6)
[3] Zhao J., Wang G.*, Chen Z., Huang Y., Wang C., Zhang A., Park C. B. Microcellular injection molded outstanding oleophilic and sound-insulating PP/PTFE nanocomposite foam. Compos. Part B-Eng. 2021, 215, 108786. (SCI, IF:13.1)
[4] Zhao J., Wang G.*, Wang C., Park C. B. Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams. Compos. Sci. Tech. 2020, 191, 108084. (SCI, IF:9.1)
[5] Chai J., Wang G.*, Zhang A., Li S., Zhao J.*, Zhao G., Park C. B. Ultra- ductile and strong in-situ fibrillated PLA/PTFE nanocomposites with outstanding heat resistance derived by CO2 treatment. Compos. Part A-Appl S. 2022, 155, 106849. (SCI, IF:8.7)
[6] Zhao J., Qiao Y., Wang G.*, Wang C., Park C. B. Lightweight and tough PP/talc composite foam with bimodal nanoporous structure achieved by microcellular injection molding. Mater. Des. 2020, 195, 109051. (SCI, IF:8.4)
[7] Zhao J., Zhao Q., Wang C., Guo B., Park C. B., Wang G.* High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar composites. Mater. Des. 2017, 131, 1–11. (SCI, IF:8.4)
[8] Zhao J., Wang G.*, Zhu W., Zhou H., Weng Y., Zhang A., Dong G., Zhao G. Lightweight and strong polypropylene/talc/polytetrafluoroethylene foams with enhanced flame-retardant performance fabricated by microcellular foam injection foaming. Mater. Des. 2022, 215, 110539. (SCI, IF:8.4)
[9] Zhao J., Wei C., Wang G.*, Li S., Zhang A., Dong G., Zhao G. Miscible polymethyl methacrylate/polylactide blend with enhanced foaming behavior and foam mechanical properties. J. CO2 Util. 2022, 61, 102065. (SCI, IF:7.7)
[10] Yang Y., Wang G.*, Zhang A., Zhao J.*, Xu Z., Li S., Zhao G. High-elastic and strong hexamethylene diisocyanate (HDI)-based thermoplastic polyurethane foams derived by microcellular foaming with co-blowing agents. J. CO2 Util. 2023, 74, 102543. (SCI, IF:7.7)

1、国家自然科学基金地区项目，原位橡胶成纤强韧聚乳酸高开孔率泡沫构件的微发泡注塑成型工艺研究，52365044，33万元，2024-2027，主持;
2、国家自然科学基金青年项目，开合模微孔发泡注塑成型轻质高强隔热聚乳酸泡沫及其性能研究，51905308，27万元，2020-2022，主持;
3、国家自然科学基金面上项目（合作项目），可变形多功能增材单元的形态/能量多物理场调控机理，52075026，15/60万元，2021-2024，主持;
4、中国博士后科学基金面上项目，原位成纤增强高性能聚乳酸泡沫的发泡注塑成型技术研究，2020M672057，8万，2020-2022，主持;
5、塑料卫生与安全质量评价技术北京市重点实验室开放课题，微孔发泡注塑成型原位微纤增强聚乳酸复合材料泡沫成型技术及其性能研究，QETHSP2021004，3万，2021-2022，主持;
6、海南大学科研启动基金项目，轻量化高性能聚乳酸复合材料泡沫的微发泡注塑成型技术研究，KYQD(ZR)23094，30万，2022-2027，主持.